TL;DR
Aqara has made a software update available that lets its Hub M3 expose supported Camera G100 units to Matter-compatible smart-home systems. Users can bind up to four cameras to one hub, but Aqara has not announced support for other models or a timeline for expansion.
Aqara has made a software update available that lets its Hub M3 bridge supported Camera G100 units into the Matter smart-home standard, allowing compatible platforms to discover the cameras without replacing them. Aqara’s setup currently allows a maximum of four cameras per hub; the company has not announced when other models will be supported.
Get business pricing on your home office setup
- Business-only prices and quantity discounts
- Tax-exempt purchasing
- Multiple users, one account, clear invoices
To set up the feature, owners need to update the firmware on both the Hub M3 and Camera G100, then use the Aqara app’s device settings to select and bind a camera to the hub. The camera appears as an endpoint under the hub’s Matter bridge. According to Matter Alpha’s report, connected Matter systems can then discover it.
Matter Alpha reports that it tested the bridged camera with SmartThings and the Open Home Foundation Matter Server, where the stream worked. The report also describes a problem in Home Assistant Core that prevented streams from loading during its early testing. That is a reported software issue, not confirmation that all Home Assistant setups will fail.
The G100 is the only camera officially listed as supported in the report. Although Aqara’s feature description refers to cameras and doorbells, Matter Alpha says it has no announced timetable for additional models. Possible future doorbell support should not be treated as confirmed.
Why a Hub Can Extend Camera Support
The update gives owners of supported cameras a way to connect them to a broader Matter-compatible smart-home setup without buying a new camera. For people already using Aqara hardware, that may reduce the cost and disruption of adding camera access to another platform. The four-device cap, however, limits how much one hub can cover.
A bridge also shifts some of the work from the camera to a more capable hub. Matter Alpha reports that running video alongside a camera’s protocol software can require additional processing resources, adding cost and development demands for manufacturers. Bridging could offer a route for older or lower-cost cameras to connect with newer platforms, but the current Aqara feature is limited to a listed model and does not establish compatibility with cameras from other brands.
Products Worth Considering

EGO POWER+ NEXUS 1400W Portable Power Station with Two 56V 6.0Ah Batteries and Charger

Makita CT225SYX 18V LXT Compact Cordless 2-Piece Combo Kit, 1.5Ah

EGO Power+ SNT2425 24-Inch Two-Stage Snow Blower with Two 7.5Ah Batteries and Dual-Port Charger
As an affiliate, we earn on qualifying purchases.
How Aqara’s Matter Bridge Works
The Hub M3 acts as the link between a camera’s existing connection to Aqara and Matter ecosystems. The camera is bound through Aqara’s app, then presented to connected Matter systems through the hub. This differs from replacing the camera with one designed to connect to Matter directly: the bridge handles the connection between the supported camera and the wider ecosystem.
Matter Alpha notes that community software such as Matterbridge has also been used to bring RTSP cameras into Matter. Those projects provide context for the bridging approach, but they do not add models to Aqara’s official support list. For this Hub M3 feature, the report identifies the G100 as the supported camera and sets the maximum at four per hub.
“Streams failed to load in Home Assistant Core, while the same setup worked through the Open Home Foundation Matter Server and SmartThings.”
— Matter Alpha, reporting on its early testing
Model Support and Streaming Still Vary
Aqara has not provided a timeline for adding cameras or doorbells beyond the G100. It is also unclear whether the company plans to support particular models, whether the four-camera limit could change, or whether additional requirements will apply to future devices.
The Home Assistant Core streaming problem remains a reported test result, and the source does not identify its cause or say when it might be fixed. Readers should check current Aqara firmware and platform compatibility information before relying on the feature in a particular setup.
Check Firmware and Model Eligibility
Owners who want to try the feature can update their Hub M3 and Camera G100 firmware, then look for the camera-binding option in the Aqara app. They should confirm their camera model is officially supported and account for the four-camera limit before configuring the bridge.
The next key developments would be an Aqara announcement naming additional supported models or setting a rollout schedule, along with any updates addressing the reported Home Assistant Core stream issue. No expansion date or fix has been announced in the source report.
Key Questions
Which Aqara camera can the Hub M3 bridge into Matter now?
The Camera G100 is the only model identified as officially supported in the report. Aqara has not announced a timeline for other cameras.
Do I need to replace my camera?
No replacement is required for a supported, updated Camera G100. Owners need to update both the camera and Hub M3 firmware and bind the camera in the Aqara app.
How many cameras can one Hub M3 support through the bridge?
The reported limit is four supported cameras per Hub M3.
Will the bridged stream work in Home Assistant?
Matter Alpha reported that streams failed to load in Home Assistant Core during early testing, while the same setup worked with SmartThings and the Open Home Foundation Matter Server. The cause and broader impact are not established.
Source: matteralpha.com
